ULTRABOX WITH ENIGMA2 PLUGIN SETUP

YOU MUST HAVE VERSION 0.0.6 INSTALLED.

Following the instructions below for installing Ultrabox / Epicstream on your E2/Enigma based devices.

*WE STRONGLY SUGGEST USING THE MIPS32EL*

Putty/SSH/Telnet to your device and run one of the following commands:

For Mips32 – (Works for most boxes) opkg install 
http://149.56.14.45/enigma2/epicstream0.0.6_mips32el.ipk

For Mipsel – The mipsel package is made for old boxes as the boxes like Dreambox 800hd clone opkg install http://149.56.14.45/enigma2/epicstream0.0.6_mips32el.ipk

For Armv7 opkg install
 http://149.56.14.45/enigma2/epicstream0.0.6_armv7a.ipk 

For Sh4 opkg install 
http://149.56.14.45/enigma2/epicstream0.0.6_sh4.ipk

Mips32el is used for the most boxes. Example VU zero, Vu Duo, Zgemma and mostly above openpli 4 boxes or new images.
Mipsel is used for old boxes dm800 clones with old openpli 2.1
sh4 is used for boxes like spark
armv7a is used by new boxes like vu 4k and gigablue sf4008

Once you have it installed, the plugin should appear in the menu called XtreamTV, open this and there will be a MAC address. Please provide this MAC address to us to complete the setup.  

Faq’s

Q: How can I install it at a enigma2 device?
A: You download putty and write the IP of the box in the place where hostname is written, You need to also tick on the telnet option and press open. You may need to write username and thats root. Now you write the right command: “uname -a”, you will see after that mips, sh4 or armv7. There are 2 packages that are confusing, the mips32el package is most used package and works on most boxes. The mipsel package is made for old boxes like Dreambox 800hd clone.

Q: How can I remove XtreamTV plugin?
A: opkg remove XtreamTV

Q: I get the message no access, You need to verify?
A: You need to write the MAC id which is displayed on the screen of the customer on the panel menu: Add e2 devices .

Q: I get the message no access, there is a problem with the internet connection
A: You dont have an internet connection, to solve this you can run the network test in enigma2 which can be found in the enigma2 menu.

Q: I get the message no access, there is a connection problem with the server
AIts possible that you can’t read the dns of the server, you can test it out to login on his box and write ping sellersdns, if its not responding. contact your administrator if you aren’t in his blocked list. If its not written there you need to run the command: echo “nameserver 8.8.8.8” > /etc/resolv.conf 

Q: I have issues regarding the speed of the plugin
A: This can be caused by ipv6, to disable it go to settings and press the blue button and restart the box. The plugin must run smooth again.

© 2019 Supernovatv.online
All rights Reserved